Contact Us

TEL: +86-755-27225419
Mob: +86-13640983275
E-mail: sales@hlmold.com.cn
Address: Building 3th, 6 Th, No.3 Industrial Zone, Da Wang Shan Village, Shajing Town, Bao'an District, Shenzhen, China

Home > Knowledge > Content
Slide block processing technology
Jan 22, 2018


1. First, the milling machine is processed in six parts.


2. Fine grinding of six surfaces to dimensional requirements,


3. Milling machine with thick processing and hanging table,


4. The platform precision is worn to the size requirement and it is sliding with the die holder.


5. The milling machine is made of inclined plane, which ensures that the slant is consistent with the pressing block, and the remaining balance is flying mode.


6. Drilling water and slanting guide hole, the hole of the inclined guide column is 1 mm larger than the guide column, and the Angle of chamfer should be 2 degrees less than the slope of the sliding block.The orifice can also be reprocessed with the die after the die is closed, depending on the situation


Previous: Influence of mold temperature on injection molding

Next: Die core processing details